In modern society, flexible rechargeable batteries have become a burgeoning apodictic choice for wearable devices. Conventional lithium-sulfur batteries lack sufficient flexibility because their electrode materials are too rigid to bend. Along with the inherent high theoretical capacity of sulfur, lithium-sulfur batteries have some issues, such as dissolution and shuttle effect of polysulfides, which restricts their efficiency and practicability. Here, a flexible and "dead-weight"-free lithium-sulfur battery substrate with a three-dimensional structure was prepared by a simple strategy. With the cooperative assistance of carbon nanotubes and graphene attached to cotton fibers, the lithium-sulfur battery with 2.0 mg cm-2 sulfur provided a high initial discharge capacity of 1098.7 mA h g-1 at 1C, and the decay rate after 300 cycles was only 0.046% per cycle. The initial discharge capacity at 2C was 872.4 mA h g-1 and the capacity was maintained 734.4 mA h g-1 after 200 cycles with only a 0.079% per cycle decay rate.
This journal is © The Royal Society of Chemistry.