Removing excess phosphorus is a highly effective method to prevent eutrophication in contaminated water. However, the design and preparation of an efficient biosorbent for phosphate capture is still a great challenge. We fabricated a novel, and inexpensive nano-biosorbent, L-NH2@Ce, by loading cerium oxide nanoparticles (nano-CeO2) within the aminated lignin using a facile in situ precipitation approach for efficient phosphate removal. The as-designed nano-biosorbent L-NH2@Ce exhibited a BET surface area (S BET) of 89.8 m2 g-1, 3 times that of lignin, and a pore volume (V p) of 0.23 cm3 g-1. Owing to these results, the adsorption capacity of L-NH2@Ce increased by 14-fold to 27.86 mg g-1 compared with lignin (1.92 mg g-1). Moreover, the L-NH2@Ce can quickly reduce a high phosphate concentration of 10 ppm to well below the discharge standard of 0.5 ppm recommended by the World Health Organization (WHO) for drinking water. Importantly, a study of leaching tests indicated the negligible risk of Ce ion leakage during phosphate adsorption over the wide pH range of 4-9. Moreover, L-NH2@Ce exhibits good reusability and retains 90% of removal efficiency after two adsorption-desorption cycles. The environmentally benignity of the raw material, the simple preparation process, and the high stability and reusability makes L-NH2@Ce a promising nano-biosorbent for phosphate removal.
This journal is © The Royal Society of Chemistry.