Heterogeneous interface design to boost interfacial polarization has become a feasible way to realize high electromagnetic wave absorbing (EMA) performance of dielectric materials. However, interfacial polarization in simple structures such as particles, rods, and flakes is weak and usually plays a secondary role. In order to enhance the interfacial polarization and simultaneously reduce the electronic conductivity to avoid reflection of electromagnetic wave, a more rational geometric structure for dielectric materials is desired. Herein, a Ti3 C2 Tx /MoS2 self-rolling rod-based foam is proposed to realize excellent interfacial polarization and achieve high EMA performance at ultralow density. Different surface tensions of Ti3 C2 Tx and ammonium tetrathiomolybdate are utilized to induce the self-rolling of Ti3 C2 Tx sheets. The rods with a high aspect ratio not only remarkably improve the polarization loss but also are beneficial to the construction of Ti3 C2 Tx /MoS2 foam, leading to enhanced EMA capability. As a result, the effective absorption bandwidth of Ti3 C2 Tx /MoS2 foam covers the whole X band (8.2-12.4 GHz) with a density of only 0.009 g cm-3 , at a thickness of 3.3 mm. The advantages of rod structures are verified through simulations in the CST microwave studio. This work inspires the rational geometric design of micro/nanostructures for new-generation EMA materials.
Keywords: MXene foams; MoS2; electromagnetic wave absorption; heterogeneous interfaces; self-rolling rod.
© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.