This paper presents a technique to localize a stereo camera for in-crash toeboard deformation measurement. The proposed technique designed a sensor suite to install not only the stereo camera but also initial measurement units (IMUs) and a camera for localizing purpose. The pose of the stereo camera is recursively estimated using the measurement of IMUs and the localization camera through an extended Kalman filter. The performance of the proposed approach was first investigated in a stepwise manner and then tested in controlled environments including an actual vehicle crash test, which had successfully resulted in measuring the toeboard deformation during a crash. With the oscillation motion in the occurrence of the crash captured, the deformation of the toeboard measured by stereo cameras can be described in a fixed coordinate system.
Keywords: crash test; in-crash measurement; localization; recursive estimation; toeboard deformation measurement.