Many people worldwide are exposed to extreme levels of fluoride in drinking water. It is, therefore, critical to develop inexpensive, locally available, and environmentally friendly adsorbents for fluoride-laden water defluoridation. In the current study, virgin scoria (volcanic rock) from Ethiopia, was modified with zirconium oxide and used as an adsorbent in a fixed-bed column aiming at the removal of fluoride from water. The adsorption capability of zirconium oxide-coated scoria (ZrOCSc) was compared with unmodified virgin scoria (VSco). XRD, FTIR, XRF, SEM, ICP-OES, and the pHPZC tests were evaluated to explore the adsorption mechanisms. Thermal analysis of VSco and ZrOCSc revealed lower total weight losses of 2.3 and 3.2 percent, respectively, owing to the removal of water molecules and OH species linked to metal oxides contained in the material. The effect of test conditions such as the pH of the solution and the influent flow rate on the adsorption capacity of the adsorbent was carefully studied. ZrOCSc exhibited the maximum removal capacity of 58 mg/kg, which was 4.46 times higher than the observations for VSco (13 mg/kg) at pH 2, and an initial flow rate of 1.25 mL/min. Breakthrough time increased with decreasing initial pH and flow rate. The adsorption experimental data under various test conditions were examined by the Thomas and Adams-Bohart models. Both models were found very effective in describing the experimental data with a correlation coefficient (R2) of ≥0.976 (ZrOCSc) and ≥0.967 (VSco). Generally, coating VSco with zirconium oxide improved the adsorption performance of VSco; hence, a ZrOCSc-packed fixed bed could be employed for the decontamination of high levels of fluoride from groundwater. However, further examination of the adsorbent using natural groundwater is advisable to produce a definitive conclusion.
Keywords: adsorption; fluoride; virgin scoria; zirconium oxide-coated scoria.