Biomechanical investigation of S2 alar-iliac screw and S1 pedicle screw fixation in the treatment of Denis type II sacral fractures

Abstract

Although S2 alar-iliac screw technique has been widely used in spinal surgery, its applicability to pelvic fractures is largely unknown. This study aimed to evaluate the biomechanical stability of S2 alar-iliac screw and S1 pedicle screw fixation in the treatment of Denis II sacral fractures. Twenty-eight artificial pelvic fracture models were treated with unilateral lumbopelvic fixation, sacroiliac screw fixation, S2 alar-iliac screw and S1 pedicle screw fixation, and S2 alar-iliac screw and contralateral S1 pedicle screw fixation (Groups 1-4, respectively; N = 7 per group). Each model was cyclically tested under increasing axial compression. Optical motion-tracking was used to assess relative displacement and gap angle, and the number of failure cycles. Relative displacement was significantly smaller in Group 3 than in Groups 1 (p = 0.004) and 4 (p < 0.001) but not significantly different between Groups 3 and 2 (p = 0.290). The gap angle in Group 3 was significantly smaller than that in Group 1 (p = 0.009) on the sagittal plane but significantly larger than that in Group 4 (p = 0.006) on the horizontal plane. A number of failure cycles was significantly higher in Group 3 than in Groups 1 (p = 0.002) and 4 (p = 0.004) but not significantly different between Groups 3 and 2 (p = 0.910). From a biomechanical perspective, S2 alar-iliac screw and S1 pedicle screw fixation can provide good stability in the treatment of Denis II sacral fractures.

Keywords: S2 alar-iliac screw; biomechanical testing; lumbopelvic fixation; sacroiliac screw; sacropelvic fixation; traumatic sacral fracture.