In this research, a single-stage batch adsorber was designed for removal of brilliant green dye (BG) from aqueous solutions using activated carbon derived from date pits (ADPC) based on the Freundlich isotherm which was the best-fitted isotherm model. Experimental work was carried out within the range of 10-50 ppm initial dye concentration to determine the optimum operating conditions which were 55 min contact time, 0.06 g adsorbent mass, 25 °C, and pH = 8. Process kinetics was best-fitted with the pseudo-second order model, which revealed that the intra-particle diffusion stage is the rate-controlling stage for the process. The process efficiency was assessed by infrared spectroscopy (FTIR), scanning microscopy (SEM), X-ray spectroscopy (EDXS), and Brunauer-Emmett-Teller (BET) where the latter showed that the specific surface area of the adsorbent is 311.38 m2 g-1, which gives a favorable maximum monolayer adsorption capacity (77.8 mg g-1). The thermodynamic study proved that BG adsorption on ADPC was physiosorptive (ΔG = -5.86 kJ mol-1) and spontaneous at low temperature (ΔH = -17.7 kJ mol-1, ΔS = -0.04 kJ mol-1 K-1).
This journal is © The Royal Society of Chemistry.