Cycling is a sustainable transportation mode that provides many health, economic and environmental benefits to society. Cities with high rates of cycling are better placed to address modern challenges of densification, carbon-neutral and connected 20-min neighbourhood goals. Despite the known benefits of cycling, participation rates in Australian cities are critically low and declining. Frequently, this low participation rate is attributed to the dangers of Australian cycle infrastructure that often necessitates the mixing of cyclists with car traffic. In addition, residents of car-dependent Australian suburbs can be resistant to the installation of cycle infrastructure where threats to traffic flow, or decreased on-street parking availability are perceived and the prohibitive cost of reconfiguration of other infrastructure maintained by the local councils to retrofit safe bike paths. This study investigates the effects on traffic behaviour of retrofitting safe, separate cycling lanes into existing residential streets in a Melbourne suburb suitable for accessing the primary neighbourhood destinations. We utilise only the widths available on the existing roadway of these streets, with minimal incursion on other facilities, such as the vehicle network and parking. Using only the existing roadway reflects the common need for municipal asset managers to minimise disruption and costs associated with street redesign. Using a traffic simulation approach, we modelled travel demand that suits suburban trips to services and shops, and we selectively applied separate cycling lanes to suitable residential streets and varied the effect of lowering speed limits. Simulations show that the selective inclusion of safe cycling lanes in some streets leads to a mere 7% increase in the average car travel times in the worst case, while requiring cyclists to increase their travel distance only marginally to avoid streets without dedicated cycling lanes. These results demonstrate that reasonable compromises are possible to make suburbs safer for cyclists and bring them closer to the 20-min neighbourhood goal. There is significant potential to enhance the result by including more street types and alternative designs. The results can inform councils in their cycle path infrastructure decisions and disprove assumptions about the influence of cyclists on car infrastructure.
Keywords: active transport; bike lane; retrofitting sustainable transport; safe cycling; simulation-based modelling; street designs; street reconfiguration; traffic simulation.