What is the impact of pulse modulation technology, laser settings and intraoperative irrigation conditions on the irrigation fluid temperature during flexible ureteroscopy? An in vivo experiment using artificial stones

Abstract

Purpose: To investigate the effect of different combinations of laser power settings and irrigation conditions using the pulse modulation technology of Quanta™ on irrigation fluid temperature (IFT) during FURS (flexible ureteroscopy) on an in-vivo porcine model with artificial stones.

Materials and methods: A female pig was used. Following the insertion of artificial stones (Begostone™, BEGO USA, Lincoln, RI), a K-type thermocouple was fixed to the created percutaneous access tract. Real-time recordings of IFT during FURS were performed without UAS (ureteral access sheath), with 10/12 UAS, 12/14 UAS and 14/16 UAS. Stone fragmentation was achieved using Quanta Litho Cyber Ho 150 W™ (Samarate, Italy). The IFT was recorded for 30 s, during laser activation, with power settings of 20, 40, 60, 75 and 100 W under both manual pump and gravity irrigation.

Results: The IFT rise above 54 °C was recorded above a power of 40 W when gravity irrigation was used. The use of UAS prolonged the time for IFT to reach high values, although high power settings increase IFT within seconds from the laser activation. Under pump irrigation, only the 100 W power setting without the use of UAS resulted in dangerous IFT after approximately 10 s.

Conclusion: The high-power Ho:YAG laser can cause a damaging thermal effect to the kidney exceeding the threshold of 54 °C, under gravity irrigation. Lower power settings (up to 40 W) can be used with safety. According to our experiment, when using high power settings, the use of UAS and manual pump irrigation, is the safest combination regarding renal thermal damage.

Keywords: Artificial; Laser; Pig; Stone; Temperature; Ureteroscopy.