Intelligent Reflecting Surfaces (IRSs) are emerging as an effective technology capable of improving the spectral and energy efficiency of future wireless networks. The proposed scenario consists of a multi-antenna base station and a single-antenna user that is assisted by an IRS. The large number of reflecting elements at the IRS and its passive operation represent an important challenge in the acquisition of the instantaneous channel state information (I-CSI) of all links as it adds a very high overhead to the system and requires equipping the IRS with radio-frequency chains. To overcome this problem, a new approach is proposed in order to optimize beamforming at the BS and the phase shifts at the IRS without considering any knowledge of I-CSI but while only exploring the statistical channel state information (S-CSI). We aim at maximizing the user-achievable rate subject to a maximum transmit power constraint. To achieve this goal, we propose a new two-phase framework. In the first phase, both the beamforming at the BS and IRS are designed based only on S-CSI and, in the second phase, the previously designed beamforming pair is used as an initial solution, and beamforming at the BS and IRS is designed only by considering the feedback of the SNR at UE. Moreover, for each phase, we propose new methods based on Genetic Algorithms. Results show that the developed algorithms can approach beamforming with I-CSI but with significantly reduced channel estimation overhead.
Keywords: beamforming; genetic algorithms; intelligent reflecting surfaces; statistical channel station information.