Freeze-Dried Biopharmaceutical Formulations are Surprisingly Less Stable than Liquid Formulations during Dropping

Abstract

Purposes: This article describes an interesting phenomenon in which optimized freeze-dried (FD) biopharmaceutical formulations are generally more prone to degradation than their liquid counterparts during dropping and proposes an underlying cause for this surprising phenomenon.

Methods: Two monoclonal antibodies (mAbs) and a fusion protein (FP) were used as model biopharmaceuticals. The stability after dropping stress was determined by ultraviolet-visible (UV-Vis), size exclusion high-performance liquid chromatography (SE-HPLC), micro-flow imaging (MFI), and dynamic light scattering (DLS).

Results: Contrary to what we would normally assume, the FD formulations of the three biopharmaceuticals studied here generally showed much higher amounts of protein sub-visible particles (SbVPs) than liquid formulations after applying the same dropping stress as determined by MFI and DLS. Traditional techniques, such as UV-Vis and SE-HPLC, could hardly detect such degradation.

Conclusions: We propose that the higher temperature caused by dropping for the FD powders than the liquid formulations was probably one of the root causes for the higher amount of particles formed for the FD powders. We also recommend that dropping stress should be included for early-stage screening and choosing liquid versus FD biopharmaceutical formulations.

Keywords: biopharmaceutical formulation; dropping; free radical; freeze-dry; protein aggregation; specific heat capacity; sub-visible particle.