We have explored an orbital angular momentum (OAM) amplifier of 10 vortex modes under different-order OAM pump modes, i.e. OAM0, OAM1, and OAM2. The all-fiber amplification system consists of an active few-mode erbium-doped fiber (FM-EDF), a mode selective pump (MSP), and a mode selective signal (MSS). These mode selective components are based on fused-taper mode selective couplers (MSC) under different wavelengths fabricated by a passive ring-core fiber (RCF). Under different-order mode pumps, the OAM amplifier experimentally exhibits mode gains (MGs) above 15 dB for 10 vortex modes with the mode purities only 89%, essentially in line with the simulation results. Especially when the signal-mode profiles are better matched to the pump-mode profiles, i.e. the OAM pumps with the same order as signals, the obtained MGs are all over 20.2 dB and the amplified OAM mode purity is up to 97%; the acquired noise figures (NFs) are <4.9 dB and even the minimum NF is 3.2 dB. The results reveal that the OAM amplifier shows low-NF and high-purity characteristics under configurable pump modes in C-band. The amplified high-order OAM mode could be promising for uses in the long-distance mode division multiplexing (MDM) and in mitigation of the upcoming capacity crunch in optical fiber communication.