Developing a low-temperature fabrication strategy of an amorphous InGaZnO (α-IGZO) channel layer is a prerequisite for high-performance oxide-based thin film transistor (TFT) flexible device applications. Herein, an ultraviolet-assisted oxygen ambient rapid thermal annealing method (UV-ORTA), which combines ultraviolet irradiation with rapid annealing treatment in an oxygen atmosphere, was proposed to realize the achievement of high-performance α-IGZO TFTs at low temperature. Experimental results have confirmed that UV-ORTA treatment has the ability to suppress defects and obtain high-quality films similar to high-temperature-annealing-treated samples. α-IGZO/HfAlO TFTs with high-performance and low-voltage operating have been achieved at a low temperature of 180 °C for 200 s, including a high μsat of 23.12 cm2 V-1 S-1, large Ion/off of 1.1 × 108, small subthreshold swing of 0.08 V/decade, and reliable stability under bias stress, respectively. As a demonstration of complex logic applications, a low-voltage resistor-loaded unipolar inverter based on an α-IGZO/HfAlO TFT has been built, demonstrating full swing characteristics and a high gain of 13.8. Low-frequency noise (LFN) characteristics of α-IGZO/HfAlO TFTs have been presented and concluded that the noise source tended to a carrier number fluctuation (ΔN) model from a carrier number and correlated mobility fluctuation (ΔN-Δμ) model. As a result, it can be inferred that the low-temperature UV-ORTA technique to improve α-IGZO thin film quality provides a facile and designable process for the integration of α-IGZO TFTs into a flexible electronic system.
Keywords: 1/f noise; UV-ORTA; inverter; low-temperature annealing; α-IGZO thin film transistors.