Objectives: To compare flowable fiber-reinforced and flowable bulk-fill resin composites regarding their degree of conversion (DC) and microtensile bond strength (μTBS) to dentin in high C-factor class I cavities.
Materials and methods: One flowable fiber-reinforced (EverX Flow, GC) and two flowable bulk-fill composites (SDR, Dentsply, and Tetric N-flow Bulk fill, Ivoclar Vivadent) were tested. Regarding DC, 10 cylindrical-shaped specimens were prepared from each material (N = 30), measured using Fourier-Transform Infrared Spectroscopy (FTIR). Regarding , class I cavities (4.5 × 4.5 × 3) were prepared on flat dentin surfaces of 30 molars, divided into three equal groups, restored with the three restorative materials, thermocycled, sectioned to create 1 mm × 1 mm cross-sectional beams, then tested using a universal testing machine. Failure mode was assessed using a stereomicroscope. Two-way ANOVA and Tukey's HSD post-hoc tests were used in DC, while One-way ANOVA was used for .
Results: The used materials showed statistically significant differences in DC with the fiber-reinforced composite having the highest value. No statistically significant differences were found between the materials regarding their .
Conclusions: Flowable fiber-reinforced composite provided the most DC performance compared to the flowable bulk-fill composites. The three used restorative materials provided comparable bonding ability to dentin in high C-factor cavities.
Clinical significance: Flowable fiber-reinforced resin composite is preferred as a dentin-replacement material in high-stress bearing areas. However, both flowable fiber-reinforced and bulk-fill resin composites are equally effective in bonding to dentin in high C-factor cavities.
Keywords: C-factor; class I cavities; degree of conversion; fiber-reinforced resin composite; flowable bulk-fill; microtensile bond strength.
© 2022 Wiley Periodicals LLC.