In this paper, a universal technology is proposed for processing low-titanium mineral raw material-apatite-nepheline ore waste, including its treatment with sulfuric or hydrochloric acid in a two-stage mode with a sequential increase in the concentration. This technique allowed us to remove nepheline and apatite in the first stage and achieve a titanium mineral content of TiO2 of more than 30%; in the second stage, we were able to convert the titanium into its precursors-titanyl sulfate monohydrate TiOSO4·H2O and a hybrid rutile-silica composition. The key stage in the sorbent synthesis is the reaction of the precursor with a phosphoric acid solution. The preferred sequence of operations begins with the mechanical activation of the precursor, causing morphological changes in it, and subsequent treatment with phosphoric acid at different concentrations under atmospheric conditions and in an autoclave, accompanied by phase transformations. Conditions for the chemical reactions which regulated the composition and structure of the final product and, accordingly, its sorption activity were found. With the help of XFA, the phase compositions of the sorbents were identified, including the individual crystalline phase α-TiP obtained from TS or the crystalline phase αTi(HPO4)2∙H2O, which is in an amorphous silica matrix obtained from a rutile-silica composition.
Keywords: acid treatment; hybrid compositions; low-titanium raw materials; sorbents; titanium sulfate; titanium-containing precursors.