In this paper we present the microwave properties of tin sulfide (SnS) thin films with the thickness of just 10 nm, grown by RF magnetron sputtering techniques on a 4 inch silicon dioxide/high-resistivity silicon wafer. In this respect, interdigitated capacitors in coplanar waveguide technology were fabricated directly on the SnS film to be used as both phase shifters and detectors, depending on the ferroelectric or semiconductor behaviour of the SnS material. The ferroelectricity of the semiconducting thin layer manifests itself in a strong dependence of the electrical permittivity on the applied DC bias voltage, which induces a phase shift of 30 degrees mm-1at 1 GHz and of 8 degrees mm-1at 10 GHz, whereas the transmission losses are less than 2 dB in the frequency range 2-20 GHz. We have also investigated the microwave detection properties of SnS, obtaining at 1 GHz a voltage responsivity of about 30 mV mW-1in the unbiased case and with an input power level of only 16μW.
Keywords: detector; ferroelectrics; microwaves; phase shifter; semiconductors; thin films; tin sulfide.
Creative Commons Attribution license.