Objectives of the present research were to examine the capacity of disc-milled high lignin biochar colloids (CBC) for the removal of ciprofloxacin (CPX) from aqueous solution and synthetic hydrolyzed human urine. In this study, adsorption of CPX was tested against the initial pH (3-10), ionic strength (0.001-0.1 M NaNO3), resident time (up to 8 h), initial CPX concentration (5-100 mg/L) and temperature (25, 35, and 45 °C). The surface morphology was examined using Brunauer-Emmett-Teller (BET) specific surface area. The CBC was observed to be < 300 nm whereas the BET surface area was 284 m2/g. Best CPX adsorption demonstrated at pH 5-6 and however, indicated ionic strength dependency. Experimental kinetics data in aqueous media were well-fitted to the pseudo-second-order (r2 of 0.98), while the Hill and Langmuir isotherm models best described the isotherm data (r2 of 0.95 and 0.94, respectively) confirming chemisorption followed by physisorption interactions. The thermodynamics results indicate that CPX adsorption onto CBC is spontaneous (-ΔG), endothermic (+ΔH) and has increased randomness (+ΔS) in the aqueous system. The kinetic experimental data in synthetic urine matrix was fitted with Elovich (r2 = 0.99) and fractional power (r2 = 0.96) models whereas Hills (r2 = 0.99) and Langmuir (r2 = 0.97) models were the most fitted with isotherm data suggesting the adsorption of CPX on the CBC by chemisorption mechanisms. In conclusion, CBC demonstrated effective removal of CPX indicating its potential to be used in wastewater treatment.
Keywords: Adsorption; Antibiotics; Emerging contaminants; Mechanized milling; Wastewater.
Copyright © 2022 Elsevier Ltd. All rights reserved.