In this research, ethylene glycol-introduced solvothermal method was employed to fabricate a novel sphere-like CuBi2O4 material to improve the adsorptive and photocatalytic performance of conventional CuBi2O4. A series of characterization has been applied to investigate properties of the obtained CuBi2O4 (CBO-EG3). Compared with conventional rod-like CuBi2O4 (CBO), the synthesized sphere-like CBO-EG3 exhibited rough surface, larger specific surface area, and more effective separation of photo-generated carriers, which overcome main shortcomings of CuBi2O4. The removal efficiency of typical antibiotic sulfamethazine (SMZ) reached almost 100% under the optimal experimental conditions. About 70% of SMZ could be adsorbed in 180-min dark reaction, with residual being photodegraded in 30 min. CBO-EG3 showed much higher photocatalytic efficiency than pure CBO, attributing to its highly effective photo-induced electron and hole separation. Meanwhile, substantial adsorption of pollutant on CBO-EG3 contributed vastly to removal of SMZ, photo-generated electrons and holes inclined to react with adsorbed SMZ directly, and photocatalytic process was mainly led by non-radical reaction. Elimination of SMZ in actual water samples and recycling experiment were also performed to evaluate CBO-EG3's practical application potential. This study delivered a method to promote CuBi2O4's adsorptive and photocatalytic ability, which could expand the application of CuBi2O4 in wastewater treatment.
Keywords: CuBi2O4; Ethylene glycol; Non-radical reaction; Photocatalysis; Solvothermal method; Sphere.
© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.