The goal of this investigation was to develop a new magnetic nanocomposite of walnut shell ash (WSA)/starch/Fe3O4 to remove Cu (II) present in groundwater samples. The desired nanocomposites were successfully synthesized by the chemical deposition method. The specific active surface area for pristine WSA and WSA/starch/Fe3O4 magnetic nanocomposites was determined to be 8.1 and 52.6 m2/g, respectively. A central composite design for the response surface method was utilized to study the influence of pH, adsorbent quantity, initial content of Cu (II), temperature, and contact time. This method showed the success of the model to design process variables and to estimate the appropriate response. The P- and F-value determined for the quadratic polynomial model showed the significance and accuracy of the proposed model in examining experimental and predicted data with R2 and Adj.R2 of 0.994 and 0.991, respectively. The Cu adsorption onto WSA and WSA/starch/Fe3O4 obeyed the Freundlich and Langmuir models, respectively. The highest Cu (II) sorption capacity of 29.0 and 45.4 mg/g was attained for WSA and WSA/starch/Fe3O4, respectively. The free energy of Gibbs had a negative value at 25-45 °C indicating that the adsorption process is spontaneous. Also, negative ΔH values for copper adsorption showed that the processes are exothermic. The kinetic adsorption data for WSA and WSA/starch/Fe3O4 followed the pseudo-second order (PSO) model. The ability of the composite adsorbent to remove copper from three groundwater samples showed that it could be reused at least 3 times with appropriate efficiency, depending on the water quality.
Keywords: Cu(2+) ions; Isotherm study; Magnetic nanoparticles; Starch; Walnut shell ash.
Copyright © 2022 Elsevier Ltd. All rights reserved.