Carbon fibres as potential bone implants with controlled doxorubicin release

Sci Rep. 2022 Feb 16;12(1):2607. doi: 10.1038/s41598-022-06044-7.

Abstract

This work presents the structural characterisation of carbon fibres obtained from the carbonization of flax tow at 400°C (CFs400°C) and 1000°C (CFs1000°C) and the thermodynamic and kinetic studies of adsorption of Doxorubicin (Dox) on the fibres. The characteristic of carbon fibres and their drug adsorption and removal mechanism were investigated and compared with that of natural flax tow. All fibres were fully characterized by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), specific surface area analysis and Boehm titration. The results demonstrated the highest adsorption properties of CFs400°C at 323 K (qmax = 275 mg g-1). The kinetic data followed the pseudo-second-order kinetic model more closely, whereas the Dubinin-Radushkevich model suitably described isotherms for all fibres. Calculated parameters revealed that the adsorption process of Dox ions is spontaneous and mainly followed by physisorption and a pore-filling mechanism. The removal efficiency for carbon fibres is low due to the effect of pore-blocking and hydrophobic hydration. However, presented fibres can be treated with a base for further chemical surface modification, increasing the adsorption capacity and controlling the release tendency.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Bone and Bones*
  • Carbon Fiber* / chemistry
  • Doxorubicin*
  • Drug Liberation
  • Flax / chemistry*
  • Hot Temperature
  • Kinetics
  • Microscopy, Electron, Scanning
  • Nanostructures*
  • Nanotechnology / methods*
  • Prostheses and Implants*
  • Spectroscopy, Fourier Transform Infrared
  • Thermodynamics
  • Tissue Scaffolds*

Substances

  • Carbon Fiber
  • Doxorubicin