Vanadis 4 steel is a tool steel processed by powder metallurgy (PM). Its main alloying elements are Cr, V and Mo. Through the application of a design of experiments with six factors and eight experiments, the parameters of the process related to the thermal treatment of these steels are deliberately varied. Those thermal parameters related to the destabilisation of austenite were analysed: the cooling method in quenching, tempering and the application of an ionic nitriding treatment. Through XRD, the percentage and types of precipitated crystalline phases were determined, and, through SEM-EDX, the microstructure was revealed. At the same time, through a pin-on-disc test, those factors with a significant influence on resistance to wear were determined. It has been concluded that, in order to increase resistance to wear, treatments of destabilisation of the austenite at 900 °C with oil quenching, tempering at 550 °C for 4 h and a subsequent treatment of plasma nitriding would be very favourable. This tempering favours a second destabilisation of the austenite and its transformation into martensite, as well as the joint precipitation of type M7C3 and MC carbides. The thickness of the nitrided layer exceeds 100 microns and generates a fully adhesive wear mechanism.
Keywords: VC; Vanadis 4; destabilization of austenite; nitriding; retained austenite; secondary carbides; tool steel; wear.