Among the emerging new welding techniques, friction stir welding (FSW) is used frequently for welding high-strength aluminum alloys that are difficult to weld by conventional fusion-welding techniques. This paper investigated the effects of tool-positioning factors on the maximum temperature generated in the dissimilar FSW joint of AA6061-T6 and AA7075-T6 aluminum alloys. Three factors of plunge depth, tool offset, and tilt angle were used as the input parameters. Numerical simulation of the FSW process was performed in ABAQUS software using the coupled Eulerian-Lagrangian (CEL) approach. Central composite design (CCD) based on response surface methodology (RSM) was used to analyze and design the experiments. Comparison of the numerical and experimental results showed that numerical simulations were in good agreement with the experimental ones. Based on the statistical model results, plunge depth, tilt angle, and tool offset were the most significant factors on maximum process temperature, respectively. It was found that increasing the plunge depth caused a sharp increase in the maximum process temperature due to increased contact surfaces and the frictional interaction between the tool and workpiece.
Keywords: friction stir welding (FSW); maximum process temperature; plunge depth; tilt angle; tool offset.