Effects of radial stress on piezoelectric ceramic tubes and transducers

X F Zhang; X J Lin; C H Yang; X Cheng; S F Huang

doi:10.1121/10.0009319

Effects of radial stress on piezoelectric ceramic tubes and transducers

J Acoust Soc Am. 2022 Jan;151(1):434. doi: 10.1121/10.0009319.

Authors

X F Zhang¹, X J Lin¹, C H Yang¹, X Cheng¹, S F Huang¹

Affiliation

¹ Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials, University of Jinan, 336 Nanxinzhuang West Road, Jinan, Shandong 250022, China.

PMID: 35105003
DOI: 10.1121/10.0009319

Abstract

Static analysis is performed for fiber windings to quantitatively control the radial stress at the outer radius of the piezoelectric ceramic tube. The radial stress is verified both experimentally and theoretically, and the dependence of the resonant and material properties of the piezoelectric ceramic tubes on the radial stress is clarified. The resonance frequencies and dielectric loss remain relatively stable, but the relative permittivity and the short circuit elastic constant decrease with the radial stress. The variations of the increased bandwidth and decreased electromechanical coupling coefficient (k₃₁), piezoelectric constant (d₃₁ and g₃₁), and mechanical quality factor (Q_m) are associated with the height-to-radius ratio. The properties of three cylindrical transducers applied with various radial stress show similar change tendencies, and a difference of 0.34 MPa radial stress results in a variation of approximately 13 in the bandwidth, 14 in Q_m, 15 in k₃₁, d₃₁, and g₃₁, and 16 in the amplitude of the first pulse. These results suggest that the consistency of the radial stress is essential, and it should be relatively small. These findings guide the design and preparation of the enhanced transducer.