Elemental mapping of fluorine by means of molecular laser induced breakdown spectroscopy

Abstract

The growing importance of fluoropolymers in high-tech applications and green technologies results in the rising need for their characterization. In contrast to conventional methods used for this task, laser-induced breakdown spectroscopy (LIBS) provides the advantage of a spatially resolved analysis. Nevertheless, the high excitation energy of fluorine results in low sensitivity of the atomic F(I) lines, which limits the feasibility of its LIBS-based analysis. This work presents a novel approach for quantitative mapping of fluorine in fluoropolymer samples. It bases on monitoring of molecular emission bands (CuF or CaF) arising from fluorine containing molecules. These species were generated during later stages of the LIBS plasma by a recombination of fluorine atoms originating from fluoropolymer sample with a molecule-forming partner (Cu or Ca) stemming from a surface coating. This approach enables F detection limits in the parts per million (μg g^-1) range and elemental imaging using single shot measurements. The elements required for molecular formation are deposited on the sample surface prior to analysis. We evaluate two techniques - spray coating and sputter coating - with regards to their effects on sensitivity and spatial resolution in elemental mapping. Overall, both methods proved to be suitable for a spatially resolved analysis of fluorine: whereas sputter-coating of copper yielded a better sensitivity, spray coating of calcium provided a higher spatial resolution.

Keywords: Fluorine; Fluoropolymers; LIBS imaging; Laser induced breakdown spectroscopy; Molecular-LIBS.