Activated carbon adsorbents were prepared by chemical activation with waste Zanthoxylum bungeanum branches as raw materials and H3PO4/H2SO4 as composite activator under different dosages of the auxiliary activator H2SO4. The prepared samples were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface area test, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The adsorption/desorption performances of low concentration toluene in the air were evaluated, and its reusability was evaluated by the adsorption/desorption cycle. Adsorption results were fitted using the quasi-first, quasi-second, and Bangham models. The adsorption properties of activated carbon adsorbent for toluene in the air show a "volcanic-type change trend" with the increase of H2SO4 dosage. The toluene adsorption properties of the prepared activated carbon adsorbents from high to low are as follows: BAC02 > BAC05 > BAC01 > BAC10 > BAC00. When the mass fraction of auxiliary activator H2SO4 was 2.0%, the adsorption amount of toluene on the prepared BAC02 activated carbon adsorbent increased by 51%, reaching 511 mg/g. After thermal desorption at 200℃, the adsorption performance of toluene was regenerated. The adsorption process of toluene conforms to the quasi-first-order model and Bangham model. The whole adsorption process can be divided into three stages: outer surface adsorption, intra-channel diffusion, and adsorption equilibrium. The addition amount of H2SO4 significantly affected the specific surface area, pore volume, and pore size distribution of the prepared activated carbon adsorbent.
Keywords: Activated carbon; Auxiliary activator H2SO4; Modified H3PO4 activation method; Toluene adsorption.
© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.