SiC was chosen as the foaming agent, and river bottom silt, waste oil sludge, paint bucket slag, and fly ash were used as raw materials, to prepare lightweight ceramsite without adding any chemical additives. The effects of SiC dosing and sintering temperature on various properties of the ceramsite were studied, and the pore-forming mechanism of the lightweight ceramsite was clarified by thermal analysis and X-ray diffraction analysis. The results showed that the single ceramsite compressive strength, water absorption, bulk density, and porosity of ceramsite sintered at 1180 °C with 1.0% SiC were 2.15 MPa, 2.02%, 490 kg/m3, and 23.85%, respectively. The major mineralogical compositions were quartz, fayalite, and kyanite, with small amounts of albite-low from 1140 to 1190 °C. Furthermore, the concentration of all tested heavy metals from ceramsite was lower than the maximum allowable concentration of the leaching solution specified in the Chinese national standard (GB 5085.3-2007), which reveals that this solid waste ceramsite will not cause secondary environmental pollution. The prepared ceramsite, exhibiting lower bulk density, high water absorption and porosity, and effective solidification of deleterious elements, can be used to prepare green lightweight aggregate concrete. Importantly, preparation of solid waste ceramsite is an effective way to dispose of hazardous wastes.
Keywords: SiC; lightweight ceramsite; sintering expansion behavior; solid waste.