Wearable technologies have great potential in health monitoring and disease diagnostics. As a consequence, interest in the study of wearable sensors has dramatically increased over recent years. Successful translation of this technology from research prototypes to commercial products requires addressing some of the major challenges faced by wearable sensors such as loss of, and damage in, the biological recognition layer of the skin-interfaced sensors. In this work, we propose a solution to this challenge by integrating micropillar array (MPA) surfaces as part of the sensing layer with the aim to protect and prevent the loss of the enzyme layer from mechanical stress while the sensor is worn. The proposed wearable sensing patch is composed of reference, counter, and working electrodes, all made of MPAs and is designed for measuring glucose in sweat. MPA sensing patch has a wide linear range of 50 μM to 1.4 mM, a sensitivity of 4.7 ± 0.8 μA mM-1, and a limit of detection of 26 ± 5 μM. The glucose sensing patch was tested using human sweat where glucose-level changes were successfully measured before and after meal consumption. The developed patch provides an alternative solution to the problem of the damage to the sensor microenvironment upon wear. But in addition, it also offers a user-friendly, cost-effective, and reliable sweat analysis platform with significant potential in health monitoring applications.
Keywords: chitosan; electrochemical sensing; glucose biosensor; gold nanoparticles; micropillar arrays; sweat; wearable technology.