Flexible conductive thin films have recently become a research area of focus in both academia and industry. In this study, a method of preparing nanofiber conductive films by centrifugal spinning is proposed. Polyurethane (PU) nanofiber films were prepared by centrifugal spinning as the flexible substrate film, and carbon nanotubes (CNTs) were used as the conducting medium, to obtain CNTs/PU nanofiber conductive films with good conductivity and elasticity. The effects of different CNT concentrations on the properties of the nanofiber films were investigated. It was found that the conductivity of the nanofiber conductive films was optimal when an impregnation concentration of 9% CNTs was used in the stretching process. Cyclic tensile resistance tests showed that the nanofiber conductive films have good durability and repeatability. Physical and structural property analysis of the CNT/PU conductive films indicate that the adsorption of the CNTs on the PU surface was successful and the CNTs were evenly dispersed on the surface of the matrix. Moreover, the CNTs improved the thermal stability of the PU membrane. The CNT/PU conductive films were pasted onto a human finger joint, wrist joint, and Adam's apple to test the detection of movement. The results showed that finger bending, wrist bending, and laryngeal prominence movement all caused a change in resistance of the conductive film, with an approximately linear curve. The results indicate that the CNT/PU nanofiber conductive film developed in this study can be used to test the motion of human joints.
Keywords: carbon nanotube; centrifugal spinning method; electrical conductivity; nanofiber conductive film; polyurethane film.
© 2022 IOP Publishing Ltd.