This paper presents the testing methodology of specimens made of layers of titanium alloy Ti6Al4V in dynamic impact loading conditions. Tests were carried out using a drop-weight impact tower. The test methodology allowed us to record parameters as displacement or force. Based on recorded data, force and absorbed energy curves during plastic deformation and sheet perforation were created. The characteristics of the fractures were also analyzed. The impact test simulation was carried out in the ABAQUS/Explicit environment. Results for one, two, and three layers of titanium alloy were compared. The increase in force required to initialize the damage and the absorbed energy during plastic deformation can be observed with an increase in the number of layers. The increase in absorbed energy is close to linear. In the simulation process, parameters such as Huber-Mises-Hencky stress value, equivalent plastic strain, temperature increase, and stress triaxiality were analyzed.
Keywords: dynamic impact test; finite element analysis; fracture toughness.