In vitro study on the partitioning of red blood cells using a microchannel network

Abstract

To investigate the partitioning properties of red blood cells (RBCs) in the bifurcating capillary vessels, an in vitro experiment was performed to perfuse human RBC suspensions into the microfluidic channels with a width of <10 μm. Two types of microchannel geometries were established. One is a single model comprising one parent and two daughter channels with different widths, and the other is a network model that had a symmetric geometry with four consecutive divergences and convergences. In addition to the fractional RBC flux at each bifurcation, changes in hematocrit levels and flow velocity before and after the bifurcation were investigated. In the single model, non-uniform partitioning of RBCs was observed, and this result was in good agreement with that of the empirical model. Furthermore, in the network model, the RBC distribution in the cross-section before the bifurcation significantly affected RBC partitioning in the two channels after the bifurcation. Hence, there was a large RBC heterogeneity in the capillary network. The hematocrit levels between the channels differed for more than one order of magnitude. Therefore, the findings of the current research could facilitate a better understanding of RBC partitioning properties in the microcirculatory system.

Keywords: Capillary network; Microfluidic channel; Partitioning; Red blood cell.