Nanobubble boundary layer thickness quantified by solvent relaxation NMR

Abstract

Hypothesis: The boundary layer holds the key to solve the puzzle of the unusual stability of the nanobubbles in solution. The quantitative determination on its mechanical and structural properties has not been achieved due to its diffusive and dynamic nature, lack of distinctive interfaces, and difficult differentiation from bulk background. Therefore, it is necessary to investigate this boundary using more sensitive interface analysis technologies to effectively differentiate the water molecules at the interface from those in the bulk.

Experiments: An in-situ and non-deconstructive method, solvent relaxation nuclear magnetic resonance, was used to investigate the boundary layer on bulk nanobubbles, where the relaxation rate of the water in the layer and its thickness were measured by solvent relaxation NMR and the ratio between the water molecules at the bubble interfaces and those in the bulk and the corresponding boundary layer thickness were determined.

Findings: The spin-spin relaxation time for the water in the layer (∼10¹ms) is found to be two orders of magnitude lower than that of the free water (∼10³ms). As the first attempt, the determined boundary layer thickness is around 35-45 nm and 17.0 %-8.7 % of the effective gaseous size of the nanobubbles, which increases with the decrease of the bubble diameter. As a result, a quantitative measurement model for bubble boundary layer has been established in order to better understand the interfacial properties and stabilization mechanism for bulk nanobubbles.

Keywords: Boundary layer thickness; Bulk nanobubbles; In-situ measurement; Nuclear magnetic resonance; Solvent relaxation.