Biofuel characteristics of non-charred briquettes from dried fecal sludge blended with food market waste: Suggesting a waste-to-biofuel enterprise as a win-win strategy to solve energy and sanitation problems in slums settlements

Abstract

This study explored the production and evaluation of briquettes made from dried fecal sludge mixed with fresh food waste as a dual strategy to solve energy poverty and poor sanitation problems in Ugandan slums. Cylindrical briquettes measuring 82 mm height by 76 mm diameter were produced from dried fecal sludge (FS) alone, and FS mixed separately with pineapple peels (FS + PP), charcoal fines (FS + CD), and bean husks (FS + BH) in a mix ratio of 50% FS: 50% biomass (wt/wt basis) using red soil as the binder. Physiochemical characteristics and fuel thermal efficiency of the briquettes were tested following ASTM standards and were compared to wood-derived charcoal and commonly traded briquettes on market in Uganda. The average moisture content was 5.1%. Bulk density was highest in FS briquettes (1.12 g/cm³) and lowest in FS + BH (0.847 g/cm³). Volatile matter (VM) was highest in FS + PP (39%) and lowest in FS alone (25.7%). The average ash content was 30.4%. FS + PP had the highest calorific value (17.92 MJ/kg) while FS alone had the lowest (6.19 MJ/kg). The highest burning rate was recorded in FS + CD briquettes (8 g/min) and was lowest in FS + PP (4 g/min). Based on the calculated burning rates and calorific values, the economic advantage calculations implied that blending one ton of dry FS with one ton of dry pineapple peels for fuel briquettes, and their use as a substitute could save consumers about USD 620 per ton of wood charcoal foregone.

Keywords: Biofuels; Fecal sludge; Slum sanitation; Thermal efficiency; Waste disposal.