In the current study, an acrylic polymer binder applicable to road signs was successfully developed by mixing various acrylic, acrylate-type, and photoinitiator-based monomer species at different acrylate series/silicone acrylate ratios. An amorphous acrylic monomer was used, and the distance between the polymers was increased to improve transparency. The binder was designed with the purpose of reducing the yellowing phenomenon due to resonance by excluding the aromatic ring structure, which is the main cause of yellowing. The optical properties of the binder were determined according to the content of n-butyl methacrylate/methyl methacrylate and the composition of the crosslinking agent in the formulation. Allyl glycidyl ether and dilauroyl peroxide were used to improve the yellowing problem of benzoyl peroxide, an aromatic photoinitiator. Adding a silicone-based trivalent acrylic monomer, 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), was also found to have a significant effect on the transparency, shear properties, and water resistance of the binder. When 15 wt% TMSPMA was added, the best water repellency and mechanical properties were exhibited. The surface morphology of the improved binder and the peeling part were confirmed using field emission scanning electron microscopy. The acrylic polymer developed in this study can be applied in the coating and adhesive industries.
Keywords: acrylic polymer; binder; external stimuli-responsive material; photostimulation; stimuli responsive polymer.