Real-world emissions and fuel consumption of gasoline and hybrid light duty vehicles under local and regulatory drive cycles

Abstract

In this study, driving trajectory data from private vehicles were collected in Toronto, Canada to construct representative local drive cycles. In addition, real-driving emission testing for four conventional gasoline vehicles (ICEV) and one hybrid electric vehicle (HEV) was conducted in the same region using a Portable Emissions Measurement System. Instantaneous fuel consumption and emissions of Carbon Monoxide (CO), Nitrogen Oxides (NO_x), and Particle Number (PN) were measured. The results for all vehicles indicate that the acceleration state tends to generate the highest emissions and fuel consumption with the largest variation due to higher power demand. When accelerating, the HEV was observed to generate four times more CO emissions than some ICEVs. Instantaneous fuel consumption and emissions were analyzed as a function of operating modes to estimate the fuel efficiency (FE) and emission factors (EF) associated with six representative local drive cycles and four regulatory drive cycles. With most regulatory drive cycles, vehicles can reach the labeled FE and EPA emission limits, except under the New York City Cycle with frequent stop-and-go conditions. In contrast, except for highway cycles, the FE of Toronto-specific drive cycles can hardly meet the labeled values. CO EFs of the HEV can be higher than ICEVs, while it is lower than the emission limit by 42% on average. ICEVs may exceed the CO limit by 131% under local highway cycles, while they can violate NO_x and PN limits under local arterial cycles. The result of this study emphasizes the importance of local drive cycles and real driving emission tests.

Keywords: Drive cycle; Emission standard; Fuel efficiency; Gasoline direction injection (GDI); Hybrid electric vehicle (HEV); Portable emission measurement system (PEMS).