The investigation and study of the limbs, especially the human arm, have inspired a wide range of humanoid robots, such as movement and muscle redundancy, as a human motor system. One of the main issues related to musculoskeletal systems is the joint redundancy that causes no unique answer for each angle in return for an arm's end effector's arbitrary trajectory. As a result, there are many architectures like the torques applied to the joints. In this study, an iterative learning controller was applied to control the 3-link musculoskeletal system's motion with 6 muscles. In this controller, the robot's task space was assumed as the feedforward of the controller and muscle space as the controller feedback. In both task and muscle spaces, some noises cause the system to be unstable, so a forgetting factor was used to a convergence task space output in the neighborhood of the desired trajectories. The results show that the controller performance has improved gradually by iterating the learning steps, and the error rate has decreased so that the trajectory passed by the end effector has practically matched the desired trajectory after 1000 iterations.
Copyright © 2021 Amin Valizadeh and Ali Akbar Akbari.