A multi-degree-of-freedom clamping type traveling-wave ultrasonic motor

Jingwen Leng; Long Jin; Xiaoxiao Dong; Hongbin Zhang; Chenglei Liu; Zhike Xu

doi:10.1016/j.ultras.2021.106621

A multi-degree-of-freedom clamping type traveling-wave ultrasonic motor

Ultrasonics. 2022 Feb:119:106621. doi: 10.1016/j.ultras.2021.106621. Epub 2021 Oct 18.

Authors

Jingwen Leng¹, Long Jin¹, Xiaoxiao Dong², Hongbin Zhang¹, Chenglei Liu¹, Zhike Xu³

Affiliations

¹ School of Electrical Engineering, Southeast University, Nanjing 210096, China.
² School of Energy and Electrical Engineering, Hohai University, Nanjing 211100, China.
³ School of Electrical Engineering, Southeast University, Nanjing 210096, China. Electronic address: xuzhike@seu.edu.cn.

PMID: 34678534
DOI: 10.1016/j.ultras.2021.106621

Abstract

This paper proposes a multi-degree-of-freedom (multi-DOF) ultrasonic motor with four stators clamping a spherical rotor. The stator surface teeth are inclined at a certain angle, using the inclined surface to contact the rotor and transfer energy. The motor frame is exquisitely designed in which substrates hold four identical stators to drive the rotor to achieve a multi-DOF rotation. COMSOL Multiphysics performs the stator's modal analysis and harmonic response analysis to illustrate the vibration mode and frequency response. A prototype is fabricated to verify the operating principle and conduct the performance tests. The experimental results indicate that the motor can reach a no-load speed of 100r/min, and the stalling torque is 150mNm under a preload of 113 N. The results also denote the motor has a high load-carrying capacity with a maximum load torque of 143mNm and accurate operation with a maximum error of 0.15 mm.

Keywords: Clamping ultrasonic motor; High load capacity; Multi-degree-of-freedom (multi-DOF); Traveling wave.