Alternariol (AOH) is one of the common mycotoxins existing in a variety of foods at low level. Aptamers hold great promise for the development of sensitive and rapid aptasensors, but suffer from the excessive length and the difficulty in identification of critical binding domains (CBDs). In this study, the 5 nt CBD of the original 59-nt AOH aptamer (AOH-59, KD = 423 nM) was identified to be a 'C' bulge in between two A-T base pairs. AOH-59 was successfully shortened to a 23 nt aptamer (AOH 6C, KD = 701 nM). A 30 nt bivalent aptamer B-2-3 (KD = 445 nM) and a 39 nt trivalent aptamer T-2-3 (KD = 274 nM) were obtained by simply incorporating one or two CBDs into AOH 6C. The AOH 6C-, B-2-3-, and T-2-3-based optical waveguide aptasensors possessed the unprecedented detection of limits (LODs, S/N = 3) of 42 ± 3, 6 ± 1 and 2 ± 1 fM, respectively. Using the AOH 6C-based sensor as an example, we further demonstrated the detection of AOH spiked in wheat powder with a LOD of 37 pg/g, 20-230-fold lower than those achieved by ELISAs. The sensor was capable for 35 times 2-min regeneration and the assay time including the extraction of AOH from wheat was only about 1 h. We not only devised the first aptasensors for AOH detection, but also provided a simple strategy to design multivalent aptamers for small molecule targets.
Keywords: Alternariol; Aptamer; Aptasensor; Critical binding site; Multivalent; Waveguide sensor.
Copyright © 2021 Elsevier B.V. All rights reserved.