To solve the problem of heavy oil demulsification difficulties in Liaohe Oilfield, phenolamine resin initiator was synthesized from p-trifluoromethyl phenol, and then FB series fluorinated polyether demulsifiers were synthesized by block polymerization using ethylene oxide (EO) and propylene oxide (PO) as raw materials. The demulsifiers were characterized by infrared spectroscopy, cloud point, hydrophilic-lipophilic balance (HLB) value, and surface tension. The demulsifying and dehydrating properties were tested by demulsifying and dehydrating experiments, the demulsification mechanism was analyzed by the microscopic demulsification process test, and the influence of demulsifier addition and demulsifying temperature on demulsifying performance was also studied. The results showed that under the condition of the optimum demulsification temperature of 60 °C and the optimum demulsifier dosage of 100 mg/L, the water removal (%) of fluorinated polyether demulsifier of FB 4 was the highest, and the overall water removal (%) of 50 mL crude oil emulsion in Liaohe Oilfield reached 90.33% within 2 h, which was better than the current demulsifier used in Liaohe crude oil.
© 2021 The Authors. Published by American Chemical Society.