Plasma-polymerised tetramethyldisiloxane (TMDSO) films are frequently applied as coatings for their abrasion resistance and barrier properties. By manipulating the deposition parameters, the chemical structure and thus mechanical properties of the films can also be controlled. These mechanical properties make them attractive as energy adsorbing layers for a range of applications, including carbon fibre composites. In this study, a new radio frequency (RF) plasma-enhanced chemical vapour deposition (PECVD) plasma reactor was designed with the capability to coat fibres with an energy adsorbing film. A key characterisation step for the system was establishing how the properties of the TMDSO films could be modified and compared with those deposited using a well-characterized microwave (MW) PECVD reactor. Film thickness and chemistry were determined with ellipsometry and X-ray photoelectron spectroscopy, respectively. The mechanical properties were investigated by nanoindentation and atomic force microscopy with peak-force quantitative nanomechanical mapping. The RF PECVD films had a greater range of Young's modulus and hardness values than the MW PECVD films, with values as high as 56.4 GPa and 7.5 GPa, respectively. These results demonstrated the varied properties of TMDSO films that could in turn be deposited onto carbon fibres using a custom-built RF PECVD reactor.
Keywords: PECVD; TMDSO; mechanical properties; plasma polymerization; thin films.