Micropiezoelectric devices have become one of the most competitive candidates for use in self-powered flexible and portable electronic products because of their instant response and mechanic-electric conversion ability. However, achievement of high output performance of micropiezoelectric devices is still a significant and challenging task. In this study, a poly(vinylidene fluoride) (PVDF)/MXene piezoelectric microdevice was fabricated through a microinjection molding process. The synergistic effect of both an intense shear rate (>104 s-1) as well as numerous polar C-F functional groups in MXene flakes promoted the formation of β-form crystals of PVDF in which the crystallinity of β-form could reach as high as 59.9%. Moreover, the shear-induced shish-kebab crystal structure with a high orientation degree (fh = ∼0.9) and the stacked MXene acted as the driving force for the dipoles to regularly arrange and produce a self-polarizing effect. Without further polarization, the fabricated piezoelectric microdevices exhibited an open-circuit voltage of 15.2 V and a short-circuit current of 497.3 nA, under optimal conditions (400 mm s-1 and 1 wt % MXene). Impressively, such piezoelectric microdevices can be used for energy storage and for sensing body motion to monitor exercise, and this may have a positive impact on next-generation smart sports equipment.
Keywords: MXene; microinjection; piezoelectric; self-poling; sensor.