Since the application of silicon materials in electronic devices in the 1950s, microprocessors are continuously getting smaller, faster, smarter, and larger in data storage capacity. One important factor that makes progress possible is decreasing the dielectric constant of the insulating layer within the integrated circuit (IC). Nevertheless, the evolution of interlayer dielectrics (ILDs) is not driven by a single factor. At first, the objective was to reduce the dielectric constant (k). Reduction of the dielectric constant of a material can be accomplished by selecting chemical bonds with low polarizability and introducing porosity. Moving from silicon dioxide, silsesquioxane-based materials, and silica-based materials to porous silica materials, the industry has been able to reduce the ILDs' dielectric constant from 4.5 to as low as 1.5. However, porous ILDs are mechanically weak, thermally unstable, and poorly compatible with other materials, which gives them the tendency to absorb chemicals, moisture, etc. All these features create many challenges for the integration of IC during the dual-damascene process, with plasma-induced damage (PID) being the most devastating one. Since the discovery of porous materials, the industry has shifted its focus from decreasing ILDs' dielectric constant to overcoming these integration challenges. More supplementary precursors (such as Si-C-Si structured compounds), deposition processes (such as NH3 plasma treatment), and post porosity plasma protection treatment (P4) were invented to solve integration-related challenges. Herein, we present the evolution of interlayer dielectric materials driven by the following three aspects, classification of dielectric materials, deposition methods, and key issues encountered and solved during the integration phase. We aim to provide a brief overview of the development of low-k dielectric materials over the past few decades.
Keywords: IC circuit; dielectric interlayer; low dielectric constant; organosilicon; porous material; thin film.