Sequential use of UV-LEDs irradiation and chlorine to disinfect waterborne fungal spores: Efficiency, mechanism and photoreactivation

J Hazard Mater. 2022 Feb 5;423(Pt A):127102. doi: 10.1016/j.jhazmat.2021.127102. Epub 2021 Sep 1.

Abstract

In this work, sequential applications of light-emitting diodes (UV-LEDs) with two wavelengths and chlorine (Cl2) were performed for fungal spores disinfection: UV-Cl2, Cl2-UV, UV/Cl2-UV, UV-UV/Cl2, Cl2-UV/Cl2-Cl2. Overall comparisons of the sequential processes with respect to the inhibitory effect on photoreactivation were also evaluated. According to the evaluation of culturability and membrane permeability, inactivation of fungal spores by UV was not enhanced by prior or post exposure to Cl2, but in the UV/Cl2 process with pre or post UV treatment, the inactivation efficiency was greatly enhanced. Take P. polonicum for example, pre-treatments by UV265 and UV280 (40 mJ/cm2) caused the log count reduction (LCR) of 1.05 log and 0.95 log, then the followed UV265/Cl2 and UV280/Cl2 at the same UV fluence caused additional LCR of 1.80 log and 2.00 log. The permeabilization of P. polonicum was also accelerated in the processes of UV/Cl2-UV and UV-UV/Cl2, especially at the wavelength of 280 nm. In the sequential processes, especially those containing UV/Cl2 or at the wavelength of 280 nm, could promote the formation of intracellular reactive oxygen species (ROS), thus leading to more severe damage to the spores as reflected in the culturability reduction, membrane permeability and inhibition of photoreactivation.

Keywords: Culturability; Disinfection; Fungal spores; Membrane permeability; Sequential process.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Chlorine*
  • Disinfection
  • Spores, Fungal
  • Ultraviolet Rays
  • Water Purification*

Substances

  • Chlorine