Objective: To clarify the morphological, biochemical, and biomechanical effects of peracetic acid-ethanol sterilization processing to human hamstring tendon allografts for different time periods.
Methods: Thirty-two fresh-frozen human hamstring tendon allografts obtained from an allograft supplier were prepared and incubated in peracetic acid-ethanol solution (PES) containing 1% v/v peracetic acid and 24% v/v ethanol. Specimens were randomly classified into four groups according to the PES processing time (untreated as the control group, 30 min as the PES30 group, 120 min as the PES120 group, and 240 min as the PES240group). Light microscopy with hematoxylin-eosin and toluidine blue were performed, along with transmission electron microscopy (TEM) to measure the collagen fibril diameters and their distributions, from which the collagen fibril index (CFI) and mass average diameter (MAD) were calculated. The thermal stability and collagen denaturation were analyzed by differential scanning calorimetry (DSC) and collagen denaturation test by α-chymotrypsin. Cyclic loading and failure testing were applied on five tendons from each group, from which the cyclic creep strain, elastic modulus, maximum stress, maximum strain, and strain energy density were calculated.
Results: Tendons in the control, PES30, PES120 groups showed similar regularly aligned collagen fibers in light microscopy images, while the images from the PES240 group revealed relatively disordered and heterogeneous collagen bundles with larger interfiber spaces. TEM analysis showed that the mean diameter (F = 3.09, P = 0.04) was lower in the PES120 group (87.15 ± 4.76 nm) than it was in the control group (99.39 ± 9.19 nm) but not statistically (P = 0.05). Moreover, the CFI value in the PES30 group (65.37 ± 4.14%) was the lowest among groups (all P ≤ 0.01), while no variance existed in density and MAD among groups (F = 2.09, P = 0.13, and F = 0.27, P = 0.85, respectively). The onset temperature (H = 8.74, P = 0.03) and peak temperature (H = 9.97, P = 0.02) were decreased in the PES30 group compared to the control group (P = 0.02 and P = 0.01, respectively), but there were no differences in enthalpy of denaturation among groups (F = 2.20, P = 0.17). The collagen denaturation test revealed lower hydroxyproline concentrations in PES-treated specimens with no statistical differences among groups (H = 8.86, P = 0.07). The maximum stress showed variance (F = 10.52, P < 0.01) that it was higher in PES30 group (68.29 ± 10.86 MPa) compared to the PES120 and the PES240 group, while it was lower in the PES120 group (19.40 ± 4.94 MPa) compared to the control and the PES30 group (all P < 0.05). The strain energy density (F = 7.34, P < 0.01) was over 4 times higher in the PES30 group (7.39 ± 2.51 MPa) than it was in the PES120 group (1.56 ± 0.64 MPa, P < 0.01).
Conclusion: PES treatment for 30 min has no adverse effect on the properties of human hamstring tendon allografts, longer processing time could not promise better properties preservation.
Keywords: Allografts; Collagen; Peracetic acid; Sterilization; Tendons.
© 2021 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.