Constructing new Fe3O4@MnOx with 3D hollow structure for efficient recovery of uranium from simulated seawater

Abstract

Enrichment of uranium from seawater is a promising method for addressing the energy crisis. Current technologies are generally not effective for enriching uranium from seawater because its concentration in seawater is low. In this study, new Fe₃O₄@MnO_x with 3D hollow structure, which is capable of enriching low concentration uranium, was prepared via a novel redox etching method. The physicochemical characteristics of Fe₃O₄@MnO_x were studied with TEM, HRTEM, SEAD, FTIR, XRD, and N₂ adsorption-desorption analysis. Dynamic kinetic studies of different initial U(VI) concentrations revealed that the pseudo-second-order model fit the sorption process better, and the sorption rates of Fe₃O₄@MnO_x in 1, 10, and 25 mg/L U(VI) solution were 0.0124, 0.00298, and 0.000867 g/mg·min, respectively. Isothermal studies showed that the maximum sorption amounts were 50.09, 56.27, and 64.62 mg/g for 1, 10, and 25 mg/L U(VI), respectively, at pH 5.0 and 313 K, suggesting that Fe₃O₄@MnO_x could effectively enrich low concentration U(VI) from water. The sorption amount of U(VI) did not significantly decrease in the presence of Na⁺, Mg²⁺, and Ca²⁺. HRTEM, FTIR, and XPS results demonstrated that Fe(II) and Mn/Fe-O-H active sites in Fe₃O₄@MnO_x were accounted for the high and specific enrichment efficiency. A column experiment was conducted to evaluate the U(VI) sorption efficiency of Fe₃O₄@MnO_x in simulated seawater. The U(VI) sorption efficiency remained above 80% in 28 days run. Our findings demonstrate that Fe₃O₄@MnO_x has extraordinary potential for the enrichment of uranium from simulated seawater.

Keywords: Fe(3)O(4)@MnO(x); Seawater; Sorption; Uranium.