Atomic layer deposition (ALD) has attracted much attention, particularly for applications in nanoelectronics because of its atomic-level controllability and high-quality products. In this study, we developed a plasma-enhanced atomic layer deposition (PEALD) process to fabricate a homogeneous indium aluminum oxide (IAO) semiconductor film. Trimethylaluminum (TMA) and dimethylaluminum isopropoxide (DMAI) were used as Al precursors, which yielded different compositions. Density functional theory (DFT) calculations on the surface reactions between indium and aluminum precursors showed that while highly reactive TMA would etch In, DMAI with lower reactivity would allow indium to persist in the films, resulting in a more controlled doping of Al. The In/Al composition ratio could be further precisely controlled by adjusting the indium precursor dose time to sub-saturation. IAO based on DMAI was applied to fabricate thin-film transistors (TFTs), showing that Al can be a carrier suppressor of indium oxide. TFTs with PEALD IAO containing 3.8 atomic % Al showed a turn-on voltage of -0.4 ± 0.3 V, a subthreshold slope of 0.09 V/decade, and a field effect mobility of 18.9 cm2/(V s).
Keywords: InAlO; TFT; dimethylaluminum isopropoxide; multicomponent ALD; surface chemistry; trimethylaluminum.