To date, PET (polyethylene terephthalate) is the most widely used plastic in packaging and also one of the most recycled polymers worldwide. However, the high transport costs and stagnated prices of recycled PET undermine recycling process profits. Transport costs can lower through compaction, which is still not a completely well-known process. Due to heterogeneous designs, the output density of the compaction process varies. This poses problems during equipment design, selection or operation processes as recovery costs sharply increase if the required density is not met. In this manuscript, the authors develop a constitutive model for the compaction of recovered PET packaging. This experimentally validated model, based on the elasto-plastic behaviour of PET packages, allows the output density range to be predicted according to the compression pressure during PET compaction. Unlike other generic compaction models that need more than two parameters, this model uses only one and better correlates with the experimental results. Unlike existing generic models, the model parameters have a physical meaning, which allows the influence of different factors on the compaction process to be assessed. Finally as a result of the model analysis, we provide some tips to enhance compaction equipment efficiency.
Keywords: Baler; Compaction; Model; PET; Packaging; Polyethylene terephthalate; Recovery.
Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.