The characteristics of heat transfer load from the non-air-conditioned (NAC) area can help to understand the complex airflow movement and thermal physical mechanisms inside large space buildings. Based on building energy modeling, the indoor thermal environment and building energy consumption of a plant for computerized numerical control (CNC) machine tools are studied. Considering the form of the stratified air-conditioning system and the phenomenon of heat retention near the roof in the plant, the double zone and triple zone models are established. The vertical air temperature, the parameters of the terminal of the air-conditioning system and the heat/cool source system of the plant in summer and winter were measured on site, which verifies the accuracy of the established model. Based on the validated model, the proportion of heat transfer load from the NAC area is calculated, at the range of about 60%-85%. The positive influence of the roof heat transfer coefficient on the sensible heat load in the NAC area is revealed. The recommended value of the non-dimensional zone-mixing flow rate between the air-conditioned (AC) and NAC areas is given, with 30% (in summer). The results of this work can help understand the composition of the stratified air-conditioning load in large spaces and optimize the design of air distribution.
Keywords: Large space building; building energy modeling; heat transfer load; on-site measurement; stratified air-conditioning system.