Developing a biomechanical model which connected with the actual anatomy of the human body is helpful to understand the human response to vibration. A finite element model of the seated human body with 175 cm in stature and 68.6 kg in weight, which consists of seven segments, six joints and soft tissue, was established to reflect apparent mass based on the Hybrid III dummy model. By comparing the body segment mass percentages with previous data, the rationality of mass distribution in this model was verified. The biomechanical parameters play a crucial role in biodynamic modeling, while the joint and soft tissue parameters are difficult to choose due to the wide range of anthropometric parameters. In this study, the root-mean-square error between the calculated and the measured apparent mass was taken as objective function, and the effect of fifteen human parameters on the objective function was analyzed through sensitivity analysis. Then seven parameters with a considerable influence on the objective function were selected as design variables, and four approximate models were established for parameter optimization. Soft tissues and joint parameters of the model were determined by parameter identification, and the finite element model that can reflect vertical in-line and fore-and-aft cross-axis apparent mass of the human body without backrest was developed. The seated human model presented in this paper can also reflect the transmissibility from seat to the first thoracic spine and the main modes of the human body below 10 Hz, which is conducive to express the human response to vibration.
Keywords: Apparent mass; Finite element modeling; Multi-objective optimization algorithm; Seated human body; Whole-body vibration.
© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.