This work investigates the efficiency of supercritical fluid extraction of hops with a variety of solvents including carbon dioxide (CO2), propane, sulfur hexafluoride (SF6), and dimethyl ether (DME) at various densities (low-density and high-density). Operating parameters were 50 bar, 100 bar and 150 bar and 20 °C, 40 °C, 60 °C and 80 °C for all solvents, respectively. The influence of process parameters on the total yield of extraction and content of bitter acids in the extracts has been investigated. The mathematical model based on Fick's second law well described the experimental extraction results. Furthermore, HPLC analysis has been used to determine α- and β-acids in extracts. The yield of bitter compounds in hop extracts was largely influenced by the type of solvent, the temperature and pressure applied during extraction. The results show that CO2 and propane were roughly equivalent to DME in solvating power, while SF6 was a poor solvent at the same conditions. The highest yield as well as the highest concentration of bitter acids in extracts were obtained by using DME, where the optimal operating conditions were 40 °C and 100 bar for the extraction of α-acids (max. concentration 9.6%), 60 °C and 50 bar for the extraction of β-acids (4.5%) and 60 °C and 150 bar for the maximum extraction yield (25.6%).
Keywords: bitter acids; carbon dioxide; diffusion coefficient; dimethyl ether; hop extract; propane; sulfur hexafluoride.