Low-cost nanoparticulate oxidation catalysts for the removal of azo and anthraquinic dyes

J Environ Health Sci Eng. 2021 Mar 8;19(1):721-731. doi: 10.1007/s40201-021-00640-x. eCollection 2021 Jun.

Abstract

Purpose: This study aimed to test the activity of Mn ferrite, hematin-Mn ferrite and colloidal maghemite in decomposition of Orange II (O-II) and Alizarin Red S (ARS) in model aqueous solutions.

Methods: Color removal was explored at room temperature using magnetic stirring with and without a magnetic bar, taking advantage of the solids' magnetism. Decomposition of H2O2 was also studied separately and as radicals provider in dye decomposition. Catalyst/dye solution was fixed at 10 mg/4 mL. pH and dye concentration were variable. Absorbance was measured during 120 min by UV-Vis. Reuse of catalysts was also performed.

Results: Azo dyes such as O-II are more resistant to oxidative removal using hydrogen peroxide than anthraquinone-like ARS. CITMD5 reduced ARS absorbance up to 71.9% when dye was less than 250 mg/L. HEM-Mn-MAG completely decolorized a 62.5 mg/L O-II solution at pH 11 while CITMD5 reached half of that conversion under the same conditions. The highest color removal in O-II/ARS mixtures was obtained with HEM-Mn-MAG, 40% absorbance reduction in 2 h. Mn-MAG is not active to remove O-II in presence of hydrogen peroxide in the 3-9 pH range at rt.

Conclusions: The high activity of Mn-MAG in hydrogen peroxide decomposition may be assigned to the combination of Mn+2/Mn+3 and Fe+2/Fe+3, because the MnOx is active in the decomposition of hydrogen peroxide. Mn-MAG can be reused, preserving high activity in this reaction. Mn-based magnetic nanoparticles should be considered as inexpensive materials to treat textile wastewaters.

Supplementary information: The online version contains supplementary material available at 10.1007/s40201-021-00640-x.

Keywords: Dye; Fenton; Ferrite; Magnetic nanoparticles; Magnetite.